ADVANTAGES NEW GENERATION OF UNIVERSAL STANDARD
- Increased bucket turning angle for all loader arm positions: in up position – up to 67°, in ground position – up to 66°.
- The hydraulic system of front loader is fully hidden in the loader arm and the cross beam, that allows to increase the field of view and to protect high-pressure hoses of hydraulic system against damage.
- OVOID-profile technology (makes loader arm more durable without increasing metal thickness) of 4 mm steel.
- Solid subframes. The subframe beams are made of 14 mm steal. The subframe rack is made of 30 mm steal and connected with beam through 10 mm box. Rear axle beam evenly distributes the load throughout the tractor frame.
- All movement joints are equipped with friction bearings.
- Frame for implements with Euro attachments (EURO/SMS) of any manufacturer.
A short overview of all new generation front loaders Universal:
Service video: how to replace a sleeve on a new generation front loaders of Universal:
SPECIFICATIONS
Load capacity in up position, kg | 1200 |
Break-out force, kg | 1300 |
Suitable for tractors | Belarus 82.1, 82.1-23/12, 826, 892, 92П, 920, 952; on demand Belarus 1025, LTZ 60А, UMZ 6 |
Bucket is towards the horizon line, mm | 3600 |
to the point of tool axis of rotation, mm | 3850 |
Bucket rotational angle,° | up to 67 |
STANDARD OPTIONS
Bucket level
With the bucket level you can check a turning angle of your implements, without leaving a tractor cabine.
Radiator Protection
Allows you to protect the tractor hood and radiator from shock during loading operations.
Swivel axle lock
The latches prevent the rotation of the fingers in the sidewalls of the struts, scarves, levers, sidewalls of the suspension, respectively, extend the life of these connections.
Individual packing
The loader is shipped on a pallet in shrink film in order to reach the client in perfect condition.
COMPLIMENTARY OPTIONS
Quick release from a tractor
Installation time: 1 person – 3 minutes.
- Smoothly drive a tractor to the front loader.
- Attach the quick-release hydraulic lines.
- Install the loader arm heels into the subframes.
- Install lock pins (you need to leave cabin and install the lock pin manually).
- Install the crossbar
- Release support legs
Removal is carried out in reverse order. Removal time: 3 minutes.
Quick release for implements
Mechanical suspension allows to swap implements with just one rotation of a handle. Installation time: 1 minute. Removal time: 30 seconds.
Joystick control
Modern joystick control increases ergonomics an operator’s workplace, simplifies the work with a front loader and increases output.
It’s possible to combine lift-lowering of the front loader arm and turning of an implement, as well as lift-lowering of the front loader and opening-closing of an implement.
Joystick control increases precision of work with a front loader.
Also with joystick control tractor’s tractor’s hydraulic circuits remain free – you can connect connect additional hydraulic equipment such as a trailer or a sweeper.
Triple valve
Can be used as another hydraulic line. When it is installed in a tractor cab, there is will be no need to get out of the cabine and switch hydroficated implements – triple valve allows to do it effortlessly right from the cabine
Hydraulic lock
Enables smooth operation of the loader, prevents inadvertent travel of loader arms and implements at neutral position of hydraulic distributors.
One-way restrictor (brake valve)
Hydrocylinders, ensures smoother operation of
front loader arms and precise positioning of a cargo.
Set of hydraulic quick-release joints
Kit allows you to quickly mount / demount the loader from the tractor, without loss of working fluid (oil). The option is relevant for the configuration “Loader with quick-release from the tractor.”
Hydraulic accumulator
Hydraulic accumulator allows you to smooth out jerks when working with a loader.