THE BLADE IS DURABLE AND CONVENIENT TO OPERATE
LOADER WORKS EXCELLENT
On November 21, 2019, I purchased Universal Robust with a joystick control and a jaw bucket. For now, the loader works perfectly, and the bucket is used, among other things, as a bulldozer blade. The loader has very powerful subframes and removable front axle unloading rods, the brake system is also convenient for servicing.
LOADERS ARE CONSTANTLY IN OPERATION
Our farm purchased the first Universal VIP loader in January 2018, we also ordered a reinforced bucket of 0.8 m3; the second Universal VIP loader with the same bucket and with a grab for logs was purchased in November.
The loaders are constantly in operation; the unit has strong welds, goes along the frame and does not remove the clearance, copes with the declared height, and allows to carry out loading in carts from one side. I would recommend more powerful cylinders to lift the bucket, but otherwise we are satisfied.
I PURCHASED A LOADER TO SERVICE THE TERRITORY OF THE CHEBOKSARY CENTRAL MARKET
Good afternoon! I would like to share a review on the purchase of the Universal loader. I bought it to service the territory of the Cheboksary central market. After contacting Agromashsnab LLC for the purchase of a Belarus-82 tractor with a reinforced front axle, the company’s managers suggested that we also purchase the Universal 800R loader with reinforced hydraulic cylinders. The dealership staff quickly installed the loader on the tractor. Lift height is good, carrying capacity is 1.5 tons. There was still little snow this year, but at the first days of work on the loader we were pleased.
We hope it will continue to work without failures.
I BOUGHT A UNIVERSAL VIP LOADER
I purchased a VIP Universal loader in January 2019. The loader copes with all the assigned tasks. Versatile hook-on bucket was acquired with a log grab. I am satisfied with the work of the loader; it is a good versatile hook-on bucket at an affordable price. No breakdowns occurred during operation for 6 months from the date of commissioning, so I decided to purchase another VIP loader.
UNIVERSAL 4.5: CONVENIENCE IS THAT IT IS REMOVABLE
Since September 2018, we have been operating the Universal 4.5 front end loader.
Usually, once a week we load chips into a chip truck. For this, we use a 1.2 m3 bucket. The loader also provides a log grab, but we use this function less often. The advantage is the purchase price of the Universal loader + the convenience is that it is removable (our loader provides both quick-detachment from a tractor and quick-detachment of operating components). Disadvantage – high pressure hoses on our loader are rather weak.
Universal 4.5 was purchased through a dealer AGROCENTER COMPANY LLC in Penza.
I liked to work with them – all very polite and fast. Willing to recommend Universal 4.5 to my friends.
WE OPERATE LOADER ON BELARUS-82.1 FOR 2 YEARS
For two years we have been operating the Universal-800R loader on Belarus-82.1. It is robust, not demanding in operation. This year, winter, as always, began suddenly. We cleaned the roads with a universal hydraulic rotary blade mounted on a loader.
I would recommend it for cleaning; it throws snow on the side of the road very well, the speed is good. I applied for a purchase to a local dealer SST LLC. The managers prompted and advised to purchase the said loader, for which I am especially grateful. Just recently we purchased another one for another department.
I PURCHASED UNIVERSAL 800 4.5 WITH AGRICULTURAL FORKS
I bought Universal 800 4.5 with agricultural forks in the AgroSpetsTehnika company in Ufa.
I liked the loader very much, I did not expect such a height, it allows loading Kamaz-Selkhoznik, and the load capacity at such a height is 1 ton, which is generally pleasing. The loader’s speed is decent. The only thing is that it disturbs the visibility during work, I would advise a little revision of the angle of the arrow itself. Thank you for the high-quality equipment!!!
I LOAD KAMAZ OR MAZ IN SHORT ORDER
In June 2019, I ordered the Universal ROBUST loader with a quick-detachment from a tractor, but without quick-detachment of operating components, with a 0.6 m3 jaw bucket and a set of 3-way crane.
https://www.youtube.com/watch?v=lrKQ2tABGkg&t=23s
I installed the loader on the Belarus-82.1 tractor by myself. All the details came up, no questions arose, all the components were sealed in a SPTA in a box.
I do all the work with a loader at the request of the people, I perform moonlighting: loading and unloading soil, sand, manure and granite crushed stone, which is heavier in density than usual, I also loaded piles, during which the rear wheels lifted. The loader copes with loading well, I really like the speed of lifting, lowering and turning the bucket, it allows KamAZ or MAZ loading in short order.
I have performed the work on planning the site, removing the soil – it turns out very well. I also liked that when raising or lowering the bucket always remains in the position in which it was lifted from the ground. The bucket level gauge came in handy. Now when I work, I don’t even look at the bucket, I keep track of everything with a level gauge. The only thing I would advise is that the pointer at the zero level (i.e. the bucket in the horizon) should be marked, for example, with red color using some indelible material, so that we tractor drivers can see it!
I removed the loader from the tractor twice, I liked it, I just pulled a stud on each side, tipped the jacks (by the way, there are big hooks now, I liked it, it’s reliable!), then lifted it over the subframes and drove off.
I liked the lift height, it is enough and there’s even a margin left; I performed loading of such machines as KamAZ, MAZ and Scania.
For those who are considering this loader with a jaw bucket, I recommend purchasing a volume of 0.6 m3, as I did. It is quite enough; I think a larger volume is not needed since it can overload the front axle.
The blade on the jaw bucket is weak, it starts to grind, it is necessary to use better material or material with some kind of hardening!
The equipment is reliable and we hope that it will help us in various works further. I wish success to the plant, good health to the team, new solutions and design ideas.
I CONNECTED UNIVERSAL ROBUST WITH BACKHOE LOADER
In August 2019, I purchased a Universal ROBUST loader without quick-detachment with a 0.6 m3 reinforced bucket.
I hung it on MTZ-82 with a backhoe loader mounted on it. To do this, I dismantled the old loader and connected it with the Universal ROBUST loader. The design of the Universal loader is very convenient and almost no own improvements were required in order to connect it with the excavator.
With the help of the Universal, I carry out absolutely all the works: loading and unloading soil, gravel and other bulk material. Planning works.
The loader is operated almost every day!
I LIKE:
Wide convenient powerful bucket (very good in planning works).
Large height and fast operation of the loader boom, which allows loading quickly absolutely any type of car (with any height of the sides),
convenient lifting kinematics (does not require additional steering of the bucket angle when lifting the boom); heavy loader design with a large boom section.
It is convenient to drive close to the car when loading, which improves the loading process itself.
I still have the most positive impressions of this loader!
I thank the plant for these loaders! I wish you prosperity so that you don’t stand still and are always one step ahead of the competition!
I already recommend the products of the Bolshaya Zemlya plant
to everyone
https://www.youtube.com/watch? v=7t81HLdWVig&feature=youtu.be
UNIVERSAL BASIC – THE MOST POSITIVE IMPRESSIONS
On October 1, 2019, we purchased a Universal Basic loader with a 0.7 m3 bucket for MTZ-82 tractor.
Mounting on a tractor was quick and convenient. So far, the loader is performing seasonal cleaning of the camp (“Berezka” Health and Education Center in Sarov). In winter, it is planned to clean the area from snow, etc. In winter, the loader will be operated almost every day.
We really like the loader. The impressions are the most positive: excellent appearance, high speed and impressive boom lift height.
I will recommend the Universal Basic loader, since the impressions are the most positive. The best wishes to the Bolshaya Zemlya plant!
WE PURCHASED TWO LOADERS FOR THE FARM
We purchased two Universal 800R loaders for the farm in 2017 from TD Soyuztekhsnab (Arkhangelsk region). We carry out all loading and unloading operations with their help. We use it in full, there are no complaints to the manufacturer. The best value for money. We wish development and prosperity to the “Bolshaya Zemlya” plant!
NEVER REGRETTED
In 2012, they were looking for loaders to replace PKU for mounting on MTZ 82 and decided to purchase Universal, which we never regretted. Today, these loaders are installed on all tractors. Everything suits: functionality, price, a clear fit of all parts, a wide selection of interchangeable tools. Solid domestic loader is not inferior to imported ones. I recommend it.
NO PROBLEMS OCCURRED DURING THE OPERATION
We purchased a loader and tractor in the ProImport company, according to the recommendation of the manager, we chose the Universal 800S loader, we were given to understand that this is the best loader on the market today. No problems occurred during the operation; we loaded timber and land.
I RECOMMEND THE UNIVERSAL 800 R TO ALL NEARBY FARMS
Universal 800 R with reinforced cylinders has been operating in our farm since the summer of 2018. It was purchased together with the new beam MTZ 82.1.
The main works assigned to the loader were harvesting hay in rolls and distributing this hay. At the time of purchase from a dealer, hay forks were more expensive than a bucket, so it was decided to buy a loader with a 0.8 bucket, and weld the forks by myself in a couple of days. I decided to buy this loader after it had been successfully operated for 2 seasons in the neighboring farm.
Our loader differed in reinforced cylinders. Thanks to the bucket, now it’s not a problem to remove and load the manure for buyers and bring gravel for myself.
Loader advantages:
1) Reliable, no failure occurred for all the time. SVAROG high-pressure hoses leaked a couple of times, which were later replaced with SEMPERIT.
2) A very convenient solution for quick-detachment of operating components and boom, it is really possible to change the components by myself in 2–3 minutes.
3) The presence of spare parts at the dealer. I have not found more manufacturers in the Primorsky Krai, except for this. Delivery of loaders of other manufacturers from central and western Russia costs 40–60 thousand rubles, and here a convenient solution was suggested: free installation of a loader from a dealer, from whom we also bought a tractor. In addition to this, for all warranty service issues it is possible to contact the dealer nearby.
Disadvantages:
1) The set does not include various two-way and three-way hydraulic valves that are needed to finalize the tractor hydraulic system. It is not so easy for buyers from the outback to buy them locally. Therefore, I consider the price increase with the inclusion of this option to be the right decision.
2) There are no reflective stickers – a mere trifle, but a thing very necessary for safety.
Also, my version of the loader does not provide for the possibility of installing a key box. For example, receiver can be mounted on the loader frame, but not the key box. Also, small mounts for headlights on an arrow would not be superfluous.
Overall, we are pleased that we have acquired this reliable, inexpensive loader.
I recommend this loader to all nearby farms.
IT WORKS AS EXPECTED
I purchased the Universal 800R in December 2018. I chose a version with reinforced hydraulic cylinders.
I am satisfied with the loader. Everything works smoothly, very convenient 0.6 m3, I change the tool in 30–40 seconds.
I have my own tool, I welded it myself. The load capacity and height are sufficient. I carry hay rolls, gravel load, as well as load logs to KamAZ. The loader always performs the lift perfectly, no need to level anything. This is a great time saver.
https://bzemlya.ru/wp-content/uploads/2019/08/VID-20190814-WA0000.mp4
VERY GRATEFUL
Good afternoon! I want to note the clear professional work of the Deputy Commercial Director Kirill Gennadyevich Demyanenko and the designer of the plant, whose name I unfortunately did not remember. I had an urgent problem with attachments bought from your dealer, the dealer did not solve the problem for me, moreover, he delayed its solution. Then I went directly to the factory and the problem was solved during the day. I am very grateful for this and I think that when there are such caring workers, the enterprise will develop and flourish. I say this as an entrepreneur with 23 years of experience. I wish you all good health, well-being, prosperity! We will purchase your products as needed by our company. Sincerely, General Director of TSK Stroyresurs LLC
GOOD UNIVERSAL VIP GOOD LOADER
I have Universal VIP versatile hook-on bucket from the Bolshaya Zemlya plant. It works for about 4 years, no problems occurred during this period. Good KUHN, enhanced version, quick-detachment of the bucket and boom. We have a bucket of 0.6 or 0.8 cubic meters, I don’t remember exactly. Well suited for sand, gravel, concrete, a larger volume is not necessary; but for grain a larger volume is needed, since the loader of the indicated volume loads for a long time. We don’t have a joystick, we did not overpay. We have a tractor with a front beam axle, so it holds the load better.
https://www.youtube.com/watch?v=4YsbsZoB-00
UNIVERSAL 800R 2014 AND 2017
Watch the video review of the Universal 800R with a load capacity of 1,500 kg after 5 years of operation.
LIKE TO OPERATE UNIVERSAL VIP AND 800R
In February 2017, for the first time, we purchased a Universal front loader. Now there are two Universal VIP and one Universal 800R in our livestock farm.The first Universal VIP was purchased together with a 1 m3 bucket, universal forks with an adjustable peak, a roll tilter and a BIG-BEG hoisting device. The loader was also equipped with an extension arm and a joystick.
In April 2017, we decided to repeat the successful experience and purchased another Universal VIP with a joystick, as well as an operating component – a 0.8 m3 bucket and another roll tilter.
And finally, in December 2018, we purchased Universal 800R complete with quick-detachment of the operating components and from the tractor, as well as 1,500 kg reinforced hydraulic cylinders. We also purchased a 0.6 m3 bucket and forks with an adjustable central peak together with the new loader.
What to say about loaders? We like Universal loaders in operation: they are convenient and they do perfectly well with the tasks. With the help of the loaders we carry out loading of feed, hay, rolls, grain, as well as perform cleaning and loading of snow in the winter.
In summer, loaders are operated every day, in winter – 3 times a week.
I like quick-detachment both of the working bodies and from the tractor. The loader itself is conveniently and quickly dismantled and installed. The change of the operating component is also quick and convenient.
In summer, loaders are operated every day, in winter 3 times a week.
During operation, the loaders have proven themselves to be reliable equipment. But we also take care of our equipment park:
we service loaders on time, lubricate studs (in winter 1 time in 2 weeks, more often in summer). As a result of the operation of the first loader since 2017, none of the studs were damaged.
We recommend the equipment of the Bolshaya Zemlya plant production.
UNIVERSAL 800 VIP – ENOUGH FOR LIFE
In September 2016, I purchased a Universal VIP 800 loader with a joystick, a 0.8 m3 jaw bucket and a universal hydraulic rotary blade for the tractor. With all this equipment, I work part-time by season on my tractor Belarus 82. I help people in loading and unloading manure, hay in bales and rolls, firewood (in the forest), I load sand, earth, gravel. In general, I do what they ask. I use it almost every day. I work with the blade only in winter, I clean the streets and neighborhood roads.
I used to work on a tractor with a loader from another manufacturer. Compared with it, Universal 800VIP is 200% better in quality, performance, it is very convenient to use, you do not get tired physically during operation. In general, I am very pleased with the loader, I think that it will be enough for me for life! Everyone who comes to visit me or see a loader during operation praise both the appearance and design features.
I REALLY LIKE THE T-150 BLADE: IT IS POWERFUL AND MANEUVERABLE
In December 2018, I purchased hydraulic rotary blade for the T-150 and KUHN on MTZ 82 – Universal 800R.
We work with the blade this winter, I really like it: powerful, maneuverable, has removable knives that can be turned over when worn.
I bought the Universal on the recommendation of my neighbors. Now I’m waiting for the season to try it out: I’ll load wheat, peas, soy, and take out the garbage. Now the loader is installed on the tractor and I liked that the Universal 800 is equipped with quick-detachment – the installation was easy.
I wish the plant further development!
Watch the video:
https://www.youtube.com/watch? v=C5i6FhXevPI
I PURCHASED A 1,600 KG LOADER
In the summer of 2019, I bought a 1,600 kg loader with a removable bucket frame through Rusbusinessauto company. I work using the loader in the Ust Kachka resort. The works are different, I load both sawdust and asphalt crumb into the onboard Kamaz. The height is enough, the lifting speed is good. I have not encountered operational problems yet. Next year I plan to buy a double-sided blade, it can be delivered together with a loader.
Required