NEW GENERATION OF FRONT LOADERS "UNIVERSAL"
PREVIOUS GENERATION OF FRONT LOADERS "UNIVERSAL"
Revolutionary form of loader arm (OVOID-PROFILE)*
Today, the OVOID-profile is used in truck cranes, which, as you know, can withstand large loads. The boom sections are connected by welding along a neutral tension line, which gives them maximum resistance to stress.
OVOID-profile is 30% stronger compared to butt welding. The OVOID-profile has only one weld, the load on which is minimal, therefore, a rupture along the weld, in contrast to the butt weld, is excluded.
• Bucket turning angles up to 74 at the up position, 68 at the ground.
• 40% more bucket rotational force.
The subframe is made of 12-20mm steel depending on a model. The transition from the base to the subframe is made of box-section elements, that provides rigidity and durability.
Unique construction of the cross beam*
• Enabled easy placement of hydraulic circuit
• Increased loader arm stiffness by 1.5 times
• Increased field of view
The hydraulic system is safely hidden within the loader arm. We use top-quality Austrian hoses of high pressure – Semperit.
Euro attachments (EURO/SMS) for implements*
New generation of UNIVERSAL loaders has frame for implements with Euro attachments of any manufacturer.
With the bucket level you can check a turning angle of your implements, without leaving a tractor cabine.
Quick and simple installation and removal
The front loader can be removed from a tractor without usage of any lifting devices, it can stand safely on its support legs.
Mechanical quick release from a tractor for UNIVERSAL STANDARD, ROBUST, VIP
Installation time: 1 person – 3 minutes.
- Smoothly drive a tractor to the front loader.
- Attach the quick-release hydraulic lines.
- Install the loader arm heels into the subframes.
- Install lock pins (you need to leave cabin and install the lock pin manually).
- Install the crossbar
- Release support legs
Removal is carried out in reverse order. Removal time: 3 minutes.
Semi-automatic quick release from a tractor for UNIVERSAL PREMIUM
Installation time: 1 person – 1 minute.
Installation is carried out similarly except step 4 – installation of lock pins . The lock pins are installed automatically, so no need to get out the cabin. Removal is carried out in reverse order. Removal time: 3 minutes.
Quick release for implements
Depending on the model, a mechanical, semi-automatic and automatic suspension is used for quick implements installation:
Mechanical (UNIVERSAL STANDARD/ROBUST on Photo 3) allows to swap implements with just one rotation of a handle. Installation time: 1 minute. Removal time: 30 seconds.
Semi-automatic (UNIVERSAL VIP on the Photo 4): implements can be installed without leaving the cabin – the hanger is fixed automatically. For implement removal you need to get out the cabin and rotate the handle. Installation time: immediately. Removal time: 30 seconds.
Automatic (UNIVERSAL PREMIUM on the Photo 5): innovative mechanism allows to install and remove attachments without operators assistance (there is hydraulic cylinder in the locking mechanism). installation and removal in no time
Joystick is a valuable addition to any model UNIVERSAL front loaders.
Modern joystick control increases ergonomics an operator’s workplace, simplifies the work with a front loader and increases output.
It’s possible to combine lift-lowering of the front loader arm and turning of an implement, as well as lift-lowering of the front loader and opening-closing of an implement.
Joystick control increases precision of work with a front loader.
Also with joystick control tractor’s tractor’s hydraulic circuits remain free – you can connect connect additional hydraulic equipment such as a trailer or a sweeper.
Joystick can be installed on any model of UNIVERSAL front loaders!
All steel elements are coated with polymer powder. Such painting method ensures effective anti-corrosion protection and increases lifespan of the machinery.
All movable joints are equipped with friction bearings which can be easily lubricated with a pressure lubricator. The latter increases durability and provides for easy maintenance
Triple (T) valve
Can be used as another hydraulic line. When it is installed in a tractor cab, there is will be no need to get out of the cabine and switch hydroficated implements – triple valve allows to do it effortlessly right from the cabine
Enables smooth operation of the loader, prevents inadvertent travel of loader arms and implements at neutral position of hydraulic distributors.
Barrel throttle valve
Hydrocylinders, ensures smoother operation of
front loader arms and precise positioning of a cargo.
*Technical advantages realized in the new generation of the loaders: Universal Basic, Universal Standard, Universal Robust, Universal VIP, Universal Premium
High-quality mounted front loaders produced by BIG LAND manufacturer are suitable for all types of loading and unloading puproses, with a cargo weight from 400 kg to 2000 kg. You can choose the front loader that is right for you!
Front loaders of UNIVERSAL series are used in agriculture and carrying out logging, municipal, road and construction works.
Front loaders of UNIVERSAL series is possible use with tractors:
- Belarus (MTZ): 320, 321 (for MMZ and Lombardini engines), 80, 82.1, 82P, 826, 892, 92P, 920, 921, 922, 952, 1021, 1025, 1220, 1221, 1523, 1822, 2022 and their modifications.
- DEUTZ-FAHR Agrolux 4.80, DEUTZ-FAHR Agrofarm 115G
- LTZ 60A
- UMZ 6