The reinforced cross-section of the arm PREMIUM Universal allows you to lift the most heavy loads (2000 kg.) To a maximum height (4000 mm), which provides convenient loading on dump trucks with any side height.
ADVANTAGES NEW GENERATION OF UNIVERSAL PREMIUM
- Semi-automatic quick release from a tractor, automatic quick release for implements
- The hydraulic system of the front loader is fully hidden in the loader arm and the cross beam, that allows to increase the field of view and to protect high-pressure hoses of hydraulic system against damage.
- OVOID-profile technology for loader arm: size of loader arm at critical section is 294х80mm and thickness is 5 mm.
- Solid subframes. The subframe beams are made of 16-20mm* steal. Subframe rack is made of 40 mm steal. Rear axle beam evenly distributes the load throughout the tractor frame.
- Increased bucket turning angle for all loader arm positions: in up position – up to 70°, in ground position – up to 66°.
- All movement joints are equipped with friction bearings and lubricated by fitting.
- Frame for implements with Euro attachments (EURO/SMS) of any manufacturer. *depends on a tractor model
A short overview of all new generation front loaders Universal:
Service video: how to replace a sleeve on a new generation front loaders of Universal:
|Load capacity in up position, kg||2000|
|Break-out force, kg||2450|
|Suitable for tractors||Belarus 82.1, 82.1-23/12, 826, 892, 92P, 920, 952, 1221|
|on demand||Belarus 921, 922, 1021, 1025, 1220, 1523 and their modifications|
|Bucket is towards the horizon line, mm||4000|
|to the point of tool axis of rotation, mm||4250|
|Bucket rotational angle,°||up to 70|
Quick release from a tractor (semi-automatic)
Installation time: 1 person – 1 minute.
Installation is carried out similarly except step 4 – installation of lock pins . The lock pins are installed automatically, so no need to get out the cabin. Removal is carried out in reverse order. Removal time: 3 minutes.
Quick release for implements (semi-automatic)
Innovative mechanism allows to install and remove attachments without operators assistance (there is hydraulic cylinder in the locking mechanism). installation and removal in no time.
Set of hydraulic quick-release joints
Kit allows you to quickly mount / demount the loader from the tractor, without loss of working fluid (oil).
Adjustable crossbar between subframes
The spacer between the subframes is installed to provide additional rigidity to the subframes.
With the bucket level you can check a turning angle of your implements, without leaving a tractor cabine.
Allows you to protect the tractor hood and radiator from shock during loading operations.
Swivel axle lock
The latches prevent the rotation of the fingers in the sidewalls of the struts, scarves, levers, sidewalls of the suspension, respectively, extend the life of these connections.
The loader is shipped on a pallet in shrink film in order to reach the client in perfect condition.
Modern joystick control increases ergonomics an operator’s workplace, simplifies the work with a front loader and increases output.
It’s possible to combine lift-lowering of the front loader arm and turning of an implement, as well as lift-lowering of the front loader and opening-closing of an implement.
Joystick control increases precision of work with a front loader.
Also with joystick control tractor’s tractor’s hydraulic circuits remain free – you can connect connect additional hydraulic equipment such as a trailer or a sweeper.
Enables smooth operation of the loader, prevents inadvertent travel of loader arms and implements at neutral position of hydraulic distributors.
One-way restrictor (brake valve)
Hydrocylinders, ensures smoother operation of
front loader arms and precise positioning of a cargo
Hydraulic accumulator allows you to smooth out jerks when working with a loader.
Find out the price of your configuration or get technical advice by contacting an online consultant, or through the “ORDER A CALL”, “ASK A QUESTION” form.